Finished – SOMO 1.74 Aspheric Premium UltraClear AR


Need More Info? Click here.

This image has an empty alt attribute; its file name is 1.74_.png
Minus Powers:
-2.25 to -8.00 Sphere with -0.25 to -4.00 Cylinder
-2.25  to -10.00 sphere with -0.25 to -3.00 Cylinder
-10.50 to -12.00 Sphere(Half Diopter Steps) with -0.25 to -2.00 Cylinder
-12.50 to -15.00 Sphere(Half Diopter Steps) with No Cylinder

Plus Powers Not Available

SOMO Aspheric 1.74 UltraClear AR with ITO

Go GREEN with our first bio-based lens!

  • Superior Anti-Reflective Coat
  • Anti-Static Coat(ITO) – Reduces Dust Particles
  • Ultra Hydrophobic Coat – Water-Resistant
  • Oleophobic Coat – Grease-Resistant
  • UV 400
  • Enhanced Surface Treatment
  • Non-Slip Edging Pad Included


  • Ultra Thin and Lightweight
  • 50% Thinner and 50% lighter than CR39 Plastic Lenses
  • 27% Thinner than Polycarbonate
  • 15% Thinner than 1.67 Index
  • Aspheric Design for Flatter Lenses
  • 3 Times Flatter Than CR 39 Plastic
  • Minimize Distortion at Edge of Lens for the Best Vision
  • Ultimate Lens Design Technology
  • Best Cosmetics by Reducing “EYE SHRINKING” Appearance of High Power Prescriptions
  • UltraClear AR Provides Best Visual Performance


  • Aspheric Design
  • MR-174 Material
  • 1.74 Refractive Index
  • 1.47 Specific Gravity
  • 33 Abbe Value
  • 99.5% Visible Light Transmittance
  • 100% UV Protection at 400nm
  • Scratch-Resistant Hardcoat
  • SOMO Factory Applied Primer Coat and Quartz UltraClear AR
  • ITO Anti-Static Treatment
This image has an empty alt attribute; its file name is DoGreen_Website04.jpg

USDA Certified Bio-based Products: The United States Department of Agriculture gives “USDA BioPreferred” certification to products derived from plants and other renewable agricultural, marine, and forestry materials which give an alternative to conventional petroleum derived products.   

 Our 1.74 has been certified to be USDA Biomass 82%. This means the ratio of fossil fuel-derived carbon and biomass-derived ingredients is 18 to 82, respectively, when tested by ASTM-D6866-12, the standard test for determining bio-based content of solid, liquid, and gaseous samples using carbon-14 radiocarbon analysis.